Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: Mac OS X 10.6.1

  1. #1

    Default Mac OS X 10.6.1

    i installed the snow leopard 10.6.1 seed this am and now spamsieve comains that it's not compatible with mail 4.1. anything i can do here?

  2. #2

    Default same thing

    also installed 10.6.1 and it says not compatible. Tried the terminal command mentioned in another post and got "cannot open" when I tried again got "(No such file or directory)". Reinstalled the program and got same thing. When I went to get info it shows as a Universal program and not an intel. Ideas?

  3. #3

    Default

    Mac OS X 10.6.1 is under NDA. If you would like to try a pre-release version of SpamSieve, please contact spamsieve@c-command.com.

    If the Terminal command:

    file ~/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve

    doesn’t work, that’s probably because your SpamSieve plug-in isn’t installed. Get Info is not suitable because it can only tell whether the executable is universal (PowerPC and Intel), not whether it’s 64-bit. I think the only reason for it not to be 64-bit would be if you had run a “slimming” utility. Don’t do that. :-)

  4. #4
    New Member
    Join Date
    Sep 2009
    Posts
    1

    Default Me too

    After upgrading to 10.6.1, Mail disables the plugin at startup. I restored the plug and ran the file command:

    /Users/aferguson/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve: Mach-O universal binary with 4 architectures
    /Users/aferguson/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve (for architecture i386): Mach-O bundle i386
    /Users/aferguson/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve (for architecture ppc7400): Mach-O bundle ppc
    /Users/aferguson/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve (for architecture ppc64): Mach-O 64-bit bundle ppc64
    /Users/aferguson/Library/Mail/Bundles/SpamSieve.mailbundle/Contents/MacOS/SpamSieve (for architecture x86_64): Mach-O 64-bit bundle x86_64

    The Console message was:

    09/04/2009 04 Sep-13:30:14 Mail[4431]

    Plugin compatibility check failed for SpamSieve.mailbundle. The plugin's Info.plist must have a SupportedPluginCompatibilityUUIDs key whose value is an array of strings that contains the compatibility UUIDs for the supported versions of the Mail application and Message framework. The compatibility UUID values are found in the PluginCompatibilityUUID key of their respective Info.plists

  5. #5

    Default

    This version is now publicly available as SpamSieve 2.7.6.

  6. #6
    New Member
    Join Date
    Sep 2009
    Posts
    3

    Default Re: MacOS X 10.6.1

    I downloaded this most recent update and installed it, told SpamSieve to install the plugin, but the Apple Mail program in 10.6.1 still tells me it disables it when Mail is launched.

  7. #7

    Default

    Quote Originally Posted by hsdajr View Post
    I downloaded this most recent update and installed it, told SpamSieve to install the plugin, but the Apple Mail program in 10.6.1 still tells me it disables it when Mail is launched.
    Which version does SpamSieve report when you choose “About SpamSieve” from the “SpamSieve” menu?

  8. #8
    New Member
    Join Date
    Sep 2009
    Posts
    3

    Default Re: MacOS X 10.6.1

    The About Box indicates 2.7.6.
    Includes Plug-In Versions:
    Apple Mail: 1.4.4 (10.5, 10.6); 1.3.1 (10.4)
    (I'm not using the Eudora or Thunderbird Plugins.)

  9. #9
    New Member
    Join Date
    Sep 2009
    Posts
    3

    Default Re: MacOS X 10.6.1

    Okay that's strange! I quit Apple Mail again, and told the SpamSieve to install the Plug-in a second time and it worked! Now that I think about it, I'm not sure I did a Repair Permissions after I installed 10.6.1, not sure if that would make a difference.

    Seems to be working fine after my second install.

  10. #10

    Default

    I got it all working.... however:

    Still I encounter something strange:

    Whenever Spamsieve found a spam mail (which it does as well as it did in previous versions), in OSX 10.6.1 it automatically puts itself to the foreground and opens the Statistics window. Very strange behaviour.

  11. #11

    Default

    Quote Originally Posted by NightwatchNL View Post
    Whenever Spamsieve found a spam mail (which it does as well as it did in previous versions), in OSX 10.6.1 it automatically puts itself to the foreground and opens the Statistics window. Very strange behaviour.
    Strange, yes. I’ve heard no other reports of that, and I think the only code in SpamSieve that auto-opens the Statistics window is when it first launches and finds that the corpus is empty.

  12. #12

    Default 10.6.1 woes

    Hi Michael:

    I upgraded to 10.6.1 two days ago and SpamSieve promptly stopped loading when Mail starts. I've tried removing it entirely from the system and reinstalling a fresh copy, which you've recommended to others, and that's not working. Any advice?

    thanks,

    Darren

  13. #13

    Default

    Quote Originally Posted by darrenwershler View Post
    I upgraded to 10.6.1 two days ago and SpamSieve promptly stopped loading when Mail starts. I've tried removing it entirely from the system and reinstalling a fresh copy, which you've recommended to others, and that's not working. Any advice?
    Please define “stopped loading.” Have you tried choosing “Install Apple Mail Plug-In” from the SpamSieve menu?

  14. #14

    Default Mac OS X 10.6.1

    Hi Michael:

    When I opened Mail, SpamSieve would not open with it. I had installed the Apple Mail Rule from within SpamSieve.

    I just noticed something else, though -- on install, Snow Leopard disabled the SpamSieve Rule but none of my other rules. I had activated it on my previous attempt but had not noticed something else: Snow Leopard also changed the second line of the Rule to read "Move Message to mailbox Mail" instead of "Move Message to mailbox Spam." I've corrected this and will let you know if it solves the problem.

  15. #15

    Default

    Quote Originally Posted by darrenwershler View Post
    When I opened Mail, SpamSieve would not open with it.
    Well, it’s not necessarily supposed to.

  16. #16

    Default

    I'm sorry, I should have been more specific. SpamSieve was not opening when mail arrived, which almost always happens when I've been away from the computer and am reopening Mail.

    Since I posted last, I received several pieces of mail, and SpamSieve opened properly. So far so good; if it sorts out the spam, I'm fine.

    What really surprised me was not so much that the SpamSieve Rule was disabled, but that it was actually changed.

  17. #17

    Default All good now

    Hi Michael:

    Pleased to report that after reinstalling SpamSieve from a clean copy and rebuilding the SpamSieve rule in Mail after Snow Leopard deactivated and modified it, all's working fine now. Thanks again for the time you put into this software; it's worth every penny.

  18. #18

    Default Spam Sieve disable since 10.6 install

    hi, all previous suggestions don't seem to solve this for me.

    As soon as I installed Snow Leopard, and stared up Mail.. I got a message saying that Mail has disable the ' Incompatible Plug in' Spam Sieve.

    Then all my mail including good and spam , went into the SPAM mailbox..

    I've tried reinstalling etc.. but no joy..

    Please can you help.. it's making life a real pain !

    thanks
    Norm

  19. #19

    Default

    Quote Originally Posted by stormer71 View Post
    As soon as I installed Snow Leopard, and stared up Mail.. I got a message saying that Mail has disable the ' Incompatible Plug in' Spam Sieve.
    Please make sure that you are using SpamSieve 2.7.6 (you can tell by choosing “About SpamSieve” from the SpamSieve menu) and then choose “Install Apple Mail Plug-In” from the SpamSieve menu. Also, please look in the folders:

    /Users/<username>/Library/Mail/Bundles
    /Library/Mail/Bundles

    What do you see there?

  20. #20

    Default

    Quote Originally Posted by Michael Tsai View Post
    Please make sure that you are using SpamSieve 2.7.6 (you can tell by choosing “About SpamSieve” from the SpamSieve menu) and then choose “Install Apple Mail Plug-In” from the SpamSieve menu. Also, please look in the folders:

    /Users/<username>/Library/Mail/Bundles
    /Library/Mail/Bundles

    What do you see there?
    Hi Michael,
    I have 2.7.6 running and I did Install the plug in for Apple Mail previously. I've checked the folders and in <username>/Library/Mail/Bundles ... there is a folder called SpamSieve.mailbundle , but there is also another folder in /Mail called Bundles (Disabled) with nothing in it.

    However.. in /Library/Mail/Bundles there are the same folders, but an additional 20 or so folders called Bundles (Disabled 1), Bundles (Disabled 2) etc etc..
    One folder called Bundles ( Disabled) has a PersonalAntispamForMail.mailbundle in it , which was was part of an Intego Antispam program, but I had uninstalled it ages ago.

    Thanks
    Norman

Page 1 of 2 12 LastLast

Similar Threads

  1. Custom Icons and Mac OS X 10.6
    By Michael Tsai in forum DropDMG
    Replies: 1
    Last Post: 09-04-2009, 11:47 AM
  2. Mac Mail keeps crashing
    By JonasJ in forum SpamSieve
    Replies: 3
    Last Post: 02-27-2009, 10:02 AM
  3. SpamSieve 2.7.1 and Eudora 6.2.4 for the Mac
    By TDaMoose in forum SpamSieve
    Replies: 1
    Last Post: 06-06-2008, 08:43 PM
  4. Installing on Mac OS 10.4 Server
    By miketeel in forum SpamSieve
    Replies: 1
    Last Post: 09-14-2007, 01:31 PM
  5. .mac
    By David in forum SpamSieve
    Replies: 3
    Last Post: 05-14-2007, 10:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •